日本語       English

Turret

A paper craft inspired by the turret mounted on battleships such as Yamato. The barrel is inserted into the pedestal, and the turret (the part that wraps the whole) is fixed to the base motor using a toothpick. With one A4 size, the creation time is about one hour. A password (described in the product's simple manual) is required to open the downloaded PDF file.

Paper craft of Turret

turret.pdf

PDF FILE [320kB]



How to make

1. Print a PDF file on A4 paper.

We recommend cardboard such as kraft paper. Specify "Actual size" when printing. If “Fit” is selected, the pedestal may not fit.

2. Assemble the two barrels and the muzzle cover, and attach the barrel to the muzzle cover.

3. Assemble the turret.

4. The barrel is fitted on the pedestal.

5. Insert the toothpick from the red point on the side of the turret, pass it through the triangular hole in the plastic housing on the base motor side of the pedestal, and pierce to the red point on the opposite side of the turret. Secure the back of the turret to the pedestal with tape.