You can create this robot easily (1 sheet of A4 paper, creation time is about 1 hour). We recommend to create multiple color differences and connect them. A password (described in the product's simple manual) is required to open the downloaded PDF file.
1. Print a PDF file on A4 paper.
We recommend cardboard such as kraft paper. Specify "Actual size" when printing. If “Fit” is selected, the pedestal may not fit.
2. Cut out and assemble each part. If you pre-crease the ridges on those parts in advance, assembly will be easier.
3. In the figure below, the U-shaped hand is far from the arm, but it is incorrect. The U-shaped hands are attached to the front and back. If the arm attachment angle is too shallow, it will hit the ground when placed on the pedestal, so please be careful.